News
EveryDatacenter

Cooling

How the heat of the servers is carried away.

Air cooling

Air cooling is the classic way of cooling a data centre. Computer room air conditioners (CRACs) or air handlers (CRAHs) blow cold air through a raised floor or overhead ducts to the front of the racks, and fans in the servers push it out of the back

Free-air cooling

Free-air cooling, also called economiser cooling, uses outside air or outside temperatures to cool a data centre instead of running chillers. When the air outside is cool enough, filtered outside air is blown through the halls, or a heat exchanger lets outside air cool the inside air without mixing

Evaporative

Evaporative cooling cools air by evaporating water into it, the way sweat cools skin. In a data centre, outside air is drawn over wet pads or through a fine mist before it reaches the servers

Direct liquid cooling

Direct liquid cooling carries heat away from chips with liquid rather than air. Cold plates, metal blocks with channels inside, sit on top of the processors and GPUs, and a coolant flows through them to a coolant distribution unit (CDU) in the hall

Immersion

Immersion cooling sinks whole servers in tanks of a liquid that does not conduct electricity. In single-phase immersion, an oil-like fluid is pumped through the tank and a heat exchanger

Sea, lake and river water

Some data centres use the sea, a lake or a river as their cooling source. Cold water is pumped from depth, passed through heat exchangers and returned slightly warmer

Chilled water

Chilled-water cooling uses chillers, large refrigeration machines, to cool water to around 7 to 18 °C. The water is piped to air handlers or cooling coils in the halls and comes back warm, and the heat is thrown out through cooling towers or dry coolers on the roof

The weekly digest

Every Monday: the data centre of the day, new pages on EveryDatacenter, and the conferences and anniversaries of the week ahead.